Control the visibility of model elements below a specific clip plane by adjusting the Depth Clipping settings.
How to Cut a Plan View at a Clip Plane in Revit
Select the Plan View
- In the Project Browser, choose the plan view you want to cut using the back clip plane.
Access Depth Clipping Settings
- In the Properties palette, under the Extents section, locate the Depth Clipping parameter.
- Note: Depth Clipping is available for plan and site views only.
- Click the button in the value column to open the Depth Clipping dialog.
Configure Depth Clipping
- In the Depth Clipping dialog, select one of the following options:
No Clip: No visibility limit—entire depth of field is visible with no far clip offset.
Clip Without Line: Limits visibility to the specified depth. The edges of elements intersecting the far clip plane are not shown.
Clip With Line: Limits visibility to the specified depth. The edges of elements intersecting the far clip plane are shown.
Adjust View Range
- Click View Range if you need to modify the View Depth setting.
- The View Depth level determines where the view will be clipped when Depth Clipping is active.
